Edge Kit with Wi-Fi

$1,249.00

Edge is an autopilot with a built-in HDMI port. Connect your camera to it and stream HD video directly through Edge on distances up to 2 km. No separate video transmission system is needed.

SKU: EDK101 Categories: ,

Description

Advanced drone controller with HDMI video input and 5.8 GHz data link

Edge is an autopilot with a built-in HDMI port. Connect your camera to it and stream HD video directly through Edge on distances up to 2 km. No separate video transmission system is needed.

Kit includes

— Edge drone controller
— UAVCAN GNSS module
— Hall sensor power module
— Set of wires and accessories
— 2x Long range 5.8 GHz Wi-Fi

Drone autopilot and video streaming in one device

Edge has an integrated HDMI input and video compression engine allowing it to capture Full HD video from an onboard camera. The stream is delivered to the GCS over a long-range 5.8 GHz Wi-Fi link.

Works seamlessly with QGroundControl

Emlid developed a special version of the app to make streaming as easy as possible. Firmware updates, vehicle configuration, video control and mission planning – everything in one application. Simply connect your device to the Edge Wi-Fi network – telemetry and video from the camera will appear on the screen.

To get a special version of QGroundControl visit Edge documentation.

Powered by ArduPilot — the best open-source autopilot

ArduPilot supports MAVLink protocol, sophisticated flight control algorithms and various flight modes. Controls any vehicle: copter, heli, plane, sub, rover and boat.

Waypoint navigation

Waypoint navigation Edge will guide the drone on a predefined mission from takeoff to landing without operator intervention.

 

Mission Control

Mission control During the flight system status is constantly monitored and delivered via telemetry to the ground control station.

 

Return to Landing

Return to landing Custom triggers can be set to activate return to landing in cases such as low battery, telemetry link loss or other inflight events.

 

Payload Control

Payload control Edge can take control of multiple payloads: camera gimbal, retractable landing gear, parachute, crop sprayers and others.

 

Everything needed for streaming in one kit

The only thing you need to get separately is an HDMI cable specifically for your camera.

ARM processors

Dual-processor architecture

ARM Cortex-A53 64-bit quad-core CPU Full-fledged Linux system with plenty of resources handles general tasks, as well as networking and media.
ARM Cortex-M3 co-processor Runs real-time operating system for time-sensitive tasks such as PWM output for motor control and RC signal decoding.

 

Temperature-stabilised dual IMU

Temperature stabilisedIntegrated heating maintains a constant temperature of IMU and barometer to ensure stable operation in a cold climate. In hot weather, the aluminium body efficiently dissipates heat from the CPU.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.